Household dust, moisture and humidity combine to cake bathroom exhaust fans with debris. Often located on the ceiling, you may not notice it’s even dirty. Luckily, bath fan grills are easy to clean. Grab the edge of the cover and pull down. Squeeze the springs to release them from the slots and remove the cover. Learn more about installing and replacing bath exhaust fans here.
Air conditioners need annual cleaning and maintenance – spring is the perfect time to make sure your air conditioner is in good working condition. There are a few easy-to-clean items both inside the house and out at the condenser unit. Neglecting your air conditioner can cause much more hassle in time and money spent on repairs. Learn the proper way to clean your air conditioner here.
Spend 30 minutes on these simple maintenance steps to keep your fridge running in tip top shape. It’s hard to believe, but six simple maintenance steps will prevent almost 100 percent of refrigerator breakdowns and eliminate those service calls. Take these steps and you can forget about spoiled food, lost time waiting for repair people and shelling out $70 an hour plus parts for the repair itself. In this story, we’ll show you how to keep your fridge humming and trouble-free. And we’ll also tell you what to check if a problem does occur.
Lets start my first post with a list of things I have done so far………
Painted gutters and downspouts, Repaired a fence post and gate, Cleaned gutters, Replaced damaged window trim, Replaced weather-stripping on front door, Hauled a couch and old cupboards to dump. Replaced a bathroom faucet, Replaced screening for door and window, Removed and disposed of a large metal awning, Replaced wax ring and secured toilet, Installed a new lock on a gate, Replaced worn out toilet valve
Installed a new mailbox and post, Installed smoke detectors, Replaced rotted wooden ramp, Replaced damaged baseboards, replaced electrical outlets, rewired lamps, etc.
Mainly all you everyday fixes
Any questions or information please feel free to click on the contact page and ask away
Clean Moldings Before Applying Painter’s Tape
Even the stickiest masking tape won’t stay put if you apply it to a dusty, dirty surface. You’ll save yourself a lot of time and frustration if you start every masking job by cleaning the moldings or the wall to which you’re applying the tape. Usually a thorough dusting with a damp rag is all that’s required. But if the surface is greasy, you’ll have to wash it with a detergent solution. TSP-PF (phosphate free), available at home centers and paint stores, is the go-to detergent for most painters. Wait for the surface to dry completely before masking.
Speed Up Painting Prep with a Painter’s Tape Applicator
If you really want to speed up and simplify your masking job, buy a tape applicator. Shown is the ScotchBlue Painter’s Tape Applicator from 3M. It’s available at home centers and paint stores with a roll of tape, and it’s designed to help you mask precisely using the adjacent surface as a guide. You simply roll it along the molding, wall or ceiling to apply the tape. Then use the built-in cutter to slice the tape at the end of the run. With this tool, even a novice can get great results with only a few minutes of practice.
Press Down Painter’s Tape to Ensure a Good Bond
After you apply painter’s tape, make sure to press down the edge to seal it. Otherwise paint is sure to seep under the edge of the tape. A flexible putty knife works great. Start at one end of your tape run and pull the blade along the tape while applying downward pressure. Tilt the putty knife blade slightly so you’re applying pressure right along the edge of the tape.
How to Protect Walls When Painting a Ceiling
If you’re painting spray texturing a ceiling, draping lightweight plastic sheeting is the best way to protect your walls. Here’s a quick and easy way to hang the plastic. Use 1-1/2-in.-wide painter’s tape with medium to high holding strength. Press the top edge down, but leave the bottom loose. It should curl up slightly to expose the sticky underside. Stick the edge of the lightweight plastic sheeting to the tape and let it hang to the floor. You don’t need to tuck the plastic underneath the tape. Just curl the tape back onto itself and stick the plastic to the exposed adhesive. Always test first in an inconspicuous area to make sure the tape doesn’t pull paint from the wall. Super-thin “painter’s plastic” sheeting is a good choice for this type of masking because it’s inexpensive and lightweight, and it produces less waste. Overlap the plastic at doorways to create an opening.
How to Apply Painter’s Tape in a Corner
It’s easy to get a perfect fit on inside corners with this simple technique. Start by running the first piece of tape up the wall, making it a little long. Press the tape down into the corner with a putty knife. Then cut along the crease with a sharp utility knife and remove the cutoff piece. Now you don’t have to be so careful with the next piece.
Apply Kraft Paper Border to Protect Floors when Painting
Here’s a tip to save you time when you’re moving drop cloths. Start out by applying a kraft paper border around the room, making sure to carefully mask the edge closest to the base trim. You can buy rolls of 6-in.-wide masking paper at home centers and paint stores. Shown is a hand-masking tool that speeds up the job. You can buy one for about $20 at home centers and paint stores.
With the border in place, you can move tarps along as you paint, and you won’t have to waste time keeping them perfectly tight to the baseboard. As long as the edge of the tarp is covering the paper, you’re good to go. And this tip works equally well on hard surfaces and carpet.
Apply Painter’s Tape Without a Special Tool
To apply painter’s tape quickly and precisely, without any special tools, stick a few inches of tape to the molding and unroll about 6 more inches. While you hold the roll of tape tight against the wall, rotate it down to stick this section of tape and repeat the process. It takes a bit of practice, but mastering this technique will dramatically increase your masking speed and accuracy.
Score Painter’s Tape Before Pulling It Off
Ideally you would remove masking tape right away, while the paint is still wet. But in reality this isn’t practical. In the first place, most water-based paint dries pretty fast. By the time you’re through painting a room, the paint where you started is already starting to dry. And if you have to apply a second coat of paint, you certainly don’t want to remove the tape and then have to reapply it.
The solution is to let the paint dry completely. Then score the edge of the tape with a putty knife before you pull it off. This will break any bond that has formed with the paint and ensure that the masking tape will come off cleanly without damaging your paint job.
Painting Inside Corners
When you’re changing wall colors at an inside corner, it can be hard to get a nice straight line, especially if the corner is rounded or has built-up layers of paint. The trick is to paint around the corner with the first color. Then when the paint dries, mask off the painted side using top-quality edge-sealing painter’s tape (FrogTape Multi-Surface is one example available from amazon.com).
But don’t try to tape right down the corner. Instead, move the tape about 1/8 in. from the corner where it’ll be easier to get a perfectly straight line. Nobody will ever notice that one paint color extends slightly past the corner, and you’ll end up with a straight, crisp color change.
Painting Prep: Foolproof Window Masking
Unless you have a super-steady hand, when painting windows it’s faster and easier to simply mask off window glass—especially if you use this super-quick method: Apply strips of painter’s tape to the sides, leaving the ends long. Then press the ends of the tape into the corner with a flexible putty knife. Use a razor knife to cut off the excess tape. Now it’s easy to fll in between the side pieces, and you don’t have to worry about getting the tape the perfect length.
If you’re spray painting instead of brushing, start by cutting a piece of paper about an inch smaller than the glass and putting it under the first piece of tape you apply.
Apply Painter’s Tape with Flexible Putty Knife
A flexible putty knife is an essential tool for applying painter’s tape. It’s better than a rigid blade for sealing the edges, cutting the tape square and scoring corners because it conforms to uneven surfaces better and you can put more pressure on the end without tearing or scraping away the tape.
Paper Flaps Protect Trim from Paint Roller Spatter
Extending the painter’s tape with a piece of 3-in. masking paper is all that’s needed to protect the woodwork from most roller spatter and drips. Three-inch paper is ideal because it’ll stand straight out. Wider paper may seem like a better idea, but it’ll sag and won’t provide as much protection. And since the 3-in. paper doesn’t sag, you’ll still be able to close doors without the paper getting in the way.
Apply 3-in. paper along the top trim of windows and doors and along the baseboard. Don’t bother to fit the paper tight into corners along the baseboard; you don’t need much spatter protection there.
Protect with Masking Paper When Painting
Masking paper adds a few bucks to the cost of a painting job, but it’s worth it. Besides protecting wide trim, it makes it easy to cut in along the baseboard, plus it protects the edge of the floor when you’re rolling the walls and ceiling.
Choose the Right Painter’s Tape for the Job
There are times when a cheaper product will do the job as well as the expensive product. But cheap painter’s tape is no bargain. If you’re going to all the trouble of masking, you want tape that will seal tightly to the surface and come off easily. But there’s no single type of tape that will work in every circumstance. For general masking, use Scotch-Blue No. 2090 available from amazon.com. There are two versions: one for standard masking, and one with less adhesion for masking over delicate surfaces. You can leave these on for up to 14 days. You can also use the blue tape on window glass. The adhesive will withstand ultraviolet light without baking onto the glass. Scotch No. 2060 available from amazon.com is extra sticky and works well for textured surfaces like stucco and brick. If you’re only going to buy one width, get 1-1/2-in.-wide tape. It works well for most tasks.
How to Remove Painter’s Tape
Several things can go wrong when it comes time to remove painter’s tape. If you wait too long, the adhesive on the tape will harden and remain stuck to the woodwork. Or if the paint sets but isn’t completely dry, some of the wall paint may peel off along with the tape.
Here are solutions to some common problems: If you’re a procrastinator or slow painter, choose tape that’s designed to be left on for several days. Scotch No. 2090 is one brand that uses a slow-hardening adhesive so it can be safely left on for about 14 days.
To avoid peeling paint, pull the tape off immediately or wait at least overnight for the paint to dry completely. Beware of paint that feels dry to the touch but hasn’t hardened and fully bonded to the wall. It may come off along with the painter’s tape.
Remove tape at about a 45-degree angle to the painted surface, as shown, to minimize the tendency for paint to peel.
If, despite waiting overnight and using a good technique, you notice the paint still peels with the tape, use the edge of your putty knife or a utility knife to cut the seal between the wall and tape before you remove the tape.
Just a little something about faucet leaks that I’m finding a lot of home owners don’t think of.
Over the past few weeks I have found that home owners want their faucet replaced when they don’t need it.
80% of the time it’s just the seat washer or the seat valve that needs fixed.
These are the average job lengths and prices. Some handyman charge a lot more and some charge a lot less.
Just remember when dealing with older homes, there is usually more involved and extra fees once you get into the job. Make sure you ask about any extra fees that may incur? Always know about the extra work that your handyman is doing so there will be no surprise on the invoice.
Just wanted to state that you should always get a second opinion no matter what. Just because a big name company gave you a quote on a job doesn’t mean it’s correct.
When it comes to it you could save hundreds if not more.
Don’t rush into anything without doing research and getting two if not more opinions!
Thanks for your time, be sure to leave any comments or questions.